Newsletter Sign-Up
May 2013 · Energy-Tech Magazine
Search 
Home Features Article
 E-mail to a Friend
 E-mail Us
September 2010
Improvements in fuel flexibility and operating cost reduction at CSU Drake Station with Targeted In-Furnace Injection technology
<< Prev 1 of 6 Next >>
Figure 7. Drake Unit 7 PRB Blends Tested
Figure 7. Drake Unit 7 PRB Blends Tested

These images accompany the article "Improvements in fuel flexibility  and operating cost reduction at CSU Drake Station with Targeted In-Furnace Injection technology" in the October 2010 print edition of Energy-Tech magazine.


-End-  
Related Articles
Recording system reliability and availability optimization in the power generation industry - June 2012
ASME: Advanced combined cycle systems based on methanol indirect combustion - May 2012
Steam generator for advanced ultra-supercritical power plants 700°C to 760°C - March 2012
Potential department interface issues in a flow accelerated corrosion program - February 2012
ASME: The value of demand response to mitigate wind integration costs in a smart grid - January 2012
ASME: Steam turbine valve testing, inspection and maintenance to avoid turbine overspeed events - December 2011
Burner component upgrades for wall-fired coal burners – RPI results and experiences - October 2011
ASME: Gasification: Eliminating risks associated with co-firing biomass - September 2011
ASME: Considerations for reviewing the effects of power uprates - August 2011
Wind integration – System and generation issues - June 2011
Hot windbox and combined cycle repowering to improve heat rate - May 2011
Integrated exhaust system for simple cycle power plants - April 2011
Good stewardship: The key to maintaining steam generator reliability and availability - March 2011
Manage the risk of turbine rotor failure - February 2011
ASME: A modified double reheat cycle - December 2010
Improvements in fuel flexibility and operating cost reduction at CSU Drake Station with Targeted In-Furnace Injection technology - October 2010
A green combined-cycle plant: From landfill to power - September 2010
Design methodology and valve sizing for heater drain systems - August 2010
As change comes to the power generation industry, an engineered approach to reliability is more important than ever - June 2010
ASME: Fluidized bed technologies for biomass combustion - March 2010
ASME: Performance and operational issues at the Boardman Coal Plant - February 2010
ASME: Simplified Morton Effect analysis for synchronous spiral instability - December 2009
ASME: Take on the challenge of level measurement in fly ash silos - October 2009
ASME: Preventing turbine water damage - ASME Standard TDP-1 - September 2009
ASME: Performance monitoring & troubleshooting with a new individual condenser tube circulating water flow and fouling (CWFF) meter – A case study - August 2009
ASME: Tips on benchmarking power plants - June 2009
ASME: Improving boiler reliability through NDT - May 2009


 

ADVERTISEMENTS